Checkbox
Required
Back to the template
Demo mode
Your answers stay in this browser tab. No execution, photo, issue, or evidence is saved by Waylantern.
Perform an engine oil change yourself
0/19
Short text
Required
Planned oil viscosity and specification
Number
Required
Planned oil quantity in liters
Multiple choice
Required
What equipment has been prepared?
Checkbox
Required
Park on a level surface, switch off the engine, and apply the parking brake.
Checkbox
Required
Allow the engine to cool sufficiently to prevent burns.
Yes / no
Required
If the vehicle is raised, is it properly supported by approved axle stands at the points specified by the manufacturer?
Checkbox
Required
Open the oil filler cap and position the drain pan under the drain plug.
Checkbox
Required
Carefully remove the drain plug and allow the used oil to drain completely.
Checkbox
Required
Replace the sealing washer and reinstall the drain plug to the torque specified by the manufacturer.
Checkbox
Required
Remove the old filter, check that its seal has not remained stuck in place, then install the new filter according to the manufacturer’s instructions.
Number
Required
Actual quantity of new oil added in liters
Yes / no
Required
After starting the engine, did the oil pressure warning light go out normally?
Yes / no
Required
After inspection, is the installation free from leaks?
Single choice
Required
What is the final oil level?
Photo
Inspection photo of the oil change area
Checkbox
Required
Take the used oil and filter to an approved collection facility.
Number
Required
Vehicle mileage at the time of the oil change
Long text
References of the products used and observations
Demo completed
You have reached the end of this procedure without creating a real execution.